Polymer Pouch Battery Aluminum Laminated Case Heat Sealing Machine for Battery Making

Pouch Cell Machines Top Side Edge Hot Sealing Machine for Polymer Pouch Cell Container

MR-SFZ200

Applications:

Mainly used for pouch battery aluminum laminated cup edges with tabs sealing before electrolyte filling process. The device uses resistance heating to seal the head, so that the aluminum-plastic film can be melted under a set pressure.

Features:

* Single-station sealing, automatic and manual modes can be switched, and the sealing effect is excellent;

* The resistance heating tube heats the sealing head, and the temperatures of the upper and lower sealing heads are accurately and independently controlled;

* The cylinder is thermally pressed, the pressure is adjustable, and the sealing holding time can be set;

* Desktop design, equipped with operating platform and heat-insulating protective cover to prevent burns;

* Equipped with protective covers to prevent accidental touching and improve work safety.

Specifications:

Model	Laminated Battery Heat Sealing Machine MR-SFZ200
Maximum seal length	200 mm Max. (200mm~400mm can be customized)
Sealing Width	5mm±0.4 (3～10mm can be customized)
Side sealing thickness	60 - 300um (depending on the thickness of the aluminum film)
Thickness of top tab edge sealing	200 - 700um (depending on the thickness of the aluminum film)
Heat sealing temperature	RT～250℃ adjustable
Temperature accuracy	±2℃
Sealing time	0-99s adjustable
Seal thickness accuracy (mm)	The thickness difference between any two points is less than 15um
Safety device	Equipped with protective device to prevent high temperature scald.
Operation mode	The equipment has the function of automatic and manual operation.
Flexibility	The equipment is easy to clean and replace the copper mold.
compressed air	5～8kg/cm2
Working speed of air compressor	≥400 times/hour
Power Supply	AC220V/110V, 50/60Hz
Power	0.5KW
Dimensions	L430x W330x H480mm
Equipment weight	35Kg
Application Notes	Suggested Sealing Parameter: 1. Upper Heating Blade Temperature: 200°C 2. Lower Heating Blade Temperature: 180°C 3. Pressure: 40 psi 4. Duration: 3 seconds Please wait until both dies reached the Setting temperature and controller disable the Low temp. ALM, then begin to operate. For completing the full sealing procedure, you may need the following combination: A. Compact Heating Sealer (suitable for top & side sealing with tab) B. Vacuum Sealing Machine (for pre-sealing in glove box after injection of electrolyte) C. Final Vacuum Sealing Machine (for vacuuming and second sealing with automatic puncture and degassing function) If you don't want to spend too much budget on the sealing part, machine A plus B can also meet your basic sealing need