Cylindrical Cell Grooving Machine

MR-GC650 is a semi-auto grooving machine. It is used for grooving various cylindrical cases including CR123,18650 26650, 32650 and AA. It is suitable for uniform automatic rolling groove of cylindrical steel shell (or capacitor aluminum shell) with battery core.

Send Inquiry

lithium battery manufacturing machine cylindrical cell battery grooving machine

Lithium Cylindrical Cell Battery Research 18650 Grooving Machine

mR-GC650

features

*The size of the groove is adjustable, the precision is high, and the size is stable.

* It can process rolling grooves of various cylindrical batteries.

*The machine is small in size, exquisite in appearance and easy to operate;

Specifications

Model	Cylindrical Cell grooving machine MR-GC650
Source voltage	110V-220V AC, 50/60Hz Single Phase
Power	140W
Suitable battery model	14500/ 18650 / 26650 / 32650, can be customized
Advantages	1) Customized die for other cylindrical cell types is available according to request 2) Each type of cylinder cell can only be grooved specifically by certain model of this equipment. Please select the type of cylinder cell for the corresponding grooving die of each cylinder cell type.
Grooving depth	1.2-2.0mm adjustable
Grooving width	1.1-1.5mm
Grooving precision	±0.1mm
Knife life	>100 0000times
Air supply	0.5MPa～0.7MPa (Air Compressor is not included) Attention: If a gas cylinder is used instead of air compressor, a two-stage pressure regulator must be installed on the gas cylinder to limit the pressure within the required working range for safe operation.
Dimension	800250500mm
Weight	70kg
Warranty	2 years limited with lifetime support Rusting and damage due to improper storage condition or maintenance are not covered by warranty