Shenzhen Meirui Zhida Technology Co., Ltd. is one of the leading manufacturers and suppliers of planetary vacuum mixing machine in China, featured by quality products and low price. Welcome to buy bulk planetary vacuum mixing machine made in China here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.
2L Planetary Vacuum Mixing Machine For Li-Ion Battery Slurry Mixing
MRBEST can provide clients with different capacities mixers according to their requirement. Including laboratory mixer, vacuum mixer and planetary vacuum mixing machine.
Model: MR-XJB -7-2L
Product Introduction
1. This MR-XJB -7-2L Planetary Vacuum Mixing Machine is a high efficient equipment with a set of vacuum mixing and dispersion function together, it is suitable for lithium electricity experiment process for anode and cathode paste mixing process, and also other glue, chemical and other industries.
2. The vacuum planetary mixer is programmable in vacuum operation, raising or lowering, speed adjusting by the frequency inverter, temperature show/control, urgent stop, and so on
3. The planetary vacuum mixer is excellent for preparing LiCoO3, LiFePO4, Phosphors and ceramic slurry without gas bubble. And the processed material results in the better dispersion and uniformity.
Main Parameters
|
Name |
Planetary Vacuum Mixing Machine MR-XJB-7-2L |
|
Lower Barrel Parts |
|
|
Design total volume |
3.8L |
|
Effective volume |
1.2L-2L |
|
Container inner diameter |
180mm |
|
Container inside depth |
150mm |
|
Container material |
The contact part with material is 304 stainless steel |
|
Tempering jacket form |
Single-layer jacket, for cooling or heating |
|
Tempering jacket port |
G3/8", with quick-open type union, jacket pressure resistance ≤0.4MPa |
|
Tempering jacket circulation system |
Prepared by customer Suggest the temperature of jacket inlet ≤ 8 ℃, and the cooling water flow > 1.5 L/min |
|
Material-discharge |
No discharge port at the bottom of the barrel |
|
Environment temperature |
-10 ～ 120°C |
|
Move mode |
No |
|
Mixing Parts |
|
|
Working frequency |
5-50 hz |
|
Mixing power |
0.75 kw |
|
Mixing blade speed |
8-76 rpm |
|
Planetary box speed |
5-52 rpm |
|
Mixing blade diameter |
94 mm |
|
Mixing blade type |
Variable cross-section spiral type, 90 ° helix |
|
Mixing blade material |
304 stainless steel |
|
Mixing blade line-speed |
0.03-0.37 m/s |
|
Mixing blade number |
2 pcs |
|
Distance between mixing blades |
6±1 mm |
|
Distance between balde and barrel wall |
3+1 mm |
|
Distance between blade and barrel bottom |
2-3 mm |
|
Dispersing Parts |
|
|
Working frequency |
5-50 hz |
|
Dispersing power |
1.1 kw |
|
Dispersing speed |
450-4450 rpm |
|
Dispersing plate diameterm |
60 mm |
|
Dispersing plate type |
Serrated |
|
Dispersing plate material |
304 stainless steel |
|
Dispersing line-speed |
1.3-13 m/s |
|
Dispersing number |
1 pcs |
|
Dispersing shaft number |
1 pcs |
|
Wall-scraping parts |
Scraping bracket material: 304 stainless steel Scraper board material: PTFE Wall scraping speed: consistent with the speed of the planetary box Removable: Removable design (removal of the scraping wall during high-viscosity process) |
|
Base and Lifting Parts |
Parts material: High rigid structure carbon steel Lifting method: hydraulic lifting Lifting guide: guide rod Lifting stroke: ≤225mm |
|
Upper Barrel Parts |
Upper barrel material: 304 stainless steel Powder and liquid feeding port: DN40, and hopper 1pcs Mirror port: DN40 tempered glass mirror 1pcs Spotlight: DN40 tempered glass mirror 1pcs Vacuuming port: G1/2" coupling 1pcs Exhaust port: shared with the vacuum port Digital vacuum gauge port: M14×1.5 |
|
Control System |
Electrical cabinet: used to house low-voltage electrical components such as inverters Operation panel: used to place buttons, knobs, etc. Power supply: AC 3×380V±5﹪, 50Hz Control method: electric control Power control and speed regulation mode: inverter start and control Cooling method: air cooling Operation mode: panel operation, button and knob Digital temperature display: material temperature Emergency stop button: 1 pcs Alarm system: over temperature alarm, over temperature alarm shutdown, alarm shutdown Speed display: the panel displays the speed Power indicator: 1 pcs |
|
Safety System |
Emergency stop: press the emergency stop switch, the equipment will stop immediately, and no operation can be performed Start low-speed mixing: mixing while lifting the barrel High speed dispersion: start mixing after the barrel is up to the position Safety lock during operation: when the machine is running, the mixing tank cannot be lowered and opened. Prevent the backflow of vacuum pipeline: the special design of vacuum buffer tank can effectively prevent the phenomenon of vacuum pump oil backflow to the mixing tank Operation failure stop: the inverter has its own overload, overcurrent, overvoltage, leakage, lack of equal protection The mixing barrel rises and falls: the mixing barrel can only rise after it is in place The vacuum in the mixing tank cannot be lowered without exhausting the vacuum (not returning to normal pressure) The mixing tank can only be started after the high-speed dispersion is in place. After the mixing tank rises to the position, it is equipped with a locking protection system to prevent the mixing tank from falling abnormally during operation. Dry mixing stage, while the barrel rising, the mixing blade need to mix at the same time. |
|
Other Description |
Temperature measuring probe: Pt100 Temperature measurement method: the temperature probe is installed on the wall of the barrel to detect the temperature of the material Bearings for transmission components: high-speed components are imported bearings, and low-speed components are domestic bearings Oil seal: domestic brand, O-ring for static seal, mechanical seal for dynamic seal Lubricating grease: domestic brand Mechanical seal lubricant: imported brand Valves: domestic brands Vacuum design requirements: optional, or customer prepare a vacuum pump, pumping capacity 2L/S Vacuum maintenance: -0.098Mpa, keep the pressure for 24 hours > -0.085Mpa, no leakage into the barrel Total power: >3kw Total weight: about 550kg Dimensions: L1000mm×W700mm×H1835mm Appearance color: beige Floor load: 900kg/㎡ |
Planetary Vacuum Mixer for different lithium battery powder and liquid mixing and dispersing, finally get a uniformly mixed slurry. Ideal for highly viscous processes.
Adapt to the working viscosity range (mPas): 1800~11000 mPas
Applicable solid content (%): 18~88%
Why choose us?
- We have a track record of delivering high-quality Battery Slurry Mixers.
- Our company establishes a long-term stable relationship with the world's leading express and logistics companies, offering fast and high quality services to as customers around the world. Our solid customer base has brought a strong impetus for future company growth.
- We provide Battery Slurry Mixers that are easy to operate and maintain.
- We believe that each position has its own professional requirements, and the right person in the right position is the talent to give full play to his role.
- Let us help you choose the perfect Battery Slurry Mixer for your needs.
- We insist on innovation-driven, and are committed to building a world powerhouse of manufacturing the Planetary Vacuum Mixing Machine.
- With expertise in crafting Battery Slurry Mixers, we are the go-to provider.
- We adhere to the interests of all relevant parties, firm confidence, fulfill the mission, and strive to build the company into an international manufacturer of Planetary Vacuum Mixing Machine that trusted by the public and preferred by customers.
- Our Battery Slurry Mixers are designed to help you achieve optimal performance.
- Our company's quality policy is: customer first, honest management, scientific management, sustainable development.
Hot Tags: planetary vacuum mixing machine, China planetary vacuum mixing machine manufacturers, suppliers, factory, 2L Vacuum Mixer, mixer machine, Battery Slurry Mixer, Lab Battery Slurry Vacuum Filter, Lithium Battery Mixer, slurry mixing tank
