Vacuum Drying Oven with Inert Gas Connection
Model: MR-DZF-6050D
Our Vacuum Drying Oven with Inert Gas Connection is designed for precise, gentle drying of sensitive materials under vacuum conditions. This oven is ideal for applications requiring low-temperature drying, oxidation prevention, and solvent recovery, particularly in lithium battery, pharmaceutical, chemical, and electronics industries.
Key Features
* Vacuum Drying Capability: Enables efficient moisture removal at low temperatures, preventing thermal degradation of heat-sensitive materials.
* Inert Gas Purge Port: Equipped with a reliable inert gas inlet (e.g., nitrogen or argon) to protect materials from oxidation and contamination during drying.
* Stainless Steel Chamber: Durable, corrosion-resistant interior ensures clean and stable drying environment.
* Accurate Temperature Control: PID-controlled heating system with uniform heat distribution and precise temperature regulation.
* Safety & Reliability: Features over-temperature protection, vacuum monitoring, and optional explosion-proof design.
Applications
Ideal for drying electrodes, powders, biological samples, polymers, and volatile substances where oxidation or contamination must be avoided.
Specifications
|
Model |
Vacuum Drying Oven with Inert Gas Connection MR-DZF-6050D |
|
Source voltage |
AC220V 50HZ |
|
Power |
1450W |
|
Vacuum Chamber Size |
L415 * W370 * H345mm |
|
Product Dimension |
L730 * W560 * H550mm |
|
Volume |
50L |
|
Heating Temperature |
RT+ 10 °C~ 200°C settable |
|
Temperature Resolution |
0.1℃ |
|
Temperature Fluctuation |
±1℃ |
|
Vacuum Gauge |
Mechanical Pointer Dial
|
|
Reach Vacuum Degree |
-0.1MPa |
|
Shelves |
3 Pcs (removable shelves, up to 6 layers can be placed) |
|
Chamber Material |
SUS304 mirror stainless steel (1Cr~18Ni9Ti) The mirror SUS304 stainless steel chamber uses the characteristics of mirror reflection to make the thermal field effect more outstanding, heat transfer faster, and the heating efficiency increased by 20%, and the temperature uniformity is better controlled.
|
|
Outer Box Material |
Cold-rolled steel plate electrostatically sprayed milky gray |
|
Oven Door |
Cold-rolled steel plate electrostatically sprayed computer blue |
|
Observation Window |
Install double-layer tempered glass rectangular observation window |
|
Air Constant Temperature Adjustment Method |
Natural heat transfer balance temperature adjustment, without circulating blower motor |
|
Heating Method |
Use stainless steel heating tube for heating, the heating tube is installed on the inner wall of the working inner tank, and the heating control element uses a non-contact thyristor device (heating on all four sides)
|
|
Nitrogen Filling Interface |
Nitrogen filling quick interface (8mm air pipe) |
|
Advantages |
It has good sealing, can reduce the oxygen content, and fill nitrogen to protect the product and prevent oxidation. It is suitable for degassing and curing of glue-like products, and is also suitable for heating and nitrogen-filling protection of heat-sensitive, easily decomposed and easily oxidized products. The biggest disadvantage is that the heating speed is slow, the drying speed of the product is slow, and the temperature control accuracy and uniformity deviation are relatively large. First, evacuate the space inside the chamber, extract the gas, and then fill it with nitrogen. Close the valve. Nitrogen will always remain in the box. If you want to reach the highest concentration of nitrogen in the box, you can repeat the same operation two or three times. Vacuum --- Fill Nitrogen Gas ---- Vacuum ---- Fill Nitrogen Gas |
|
Vauum Pump |
External Connecting Two-stage Rotary Vane Vacuum Pump Motor Power: 750W Pumping Speed: 14.4m3/h Limit Pressure: 2x10-1Pa Oiling Amount: 500ml
|
Hot Tags: vacuum drying oven with inert gas connection, China vacuum drying oven with inert gas connection manufacturers, suppliers, factory
