Glove box glove replacement method

1. Push down the gloves to be replaced
2. Remove the outer O -type circle, and then move the O -shaped circle to cause the gloves on the outside slot
3. Roll the gloves to the side of the O -shaped circle outside. Be careful not to let the gloves fall from the glove's mouth
4. Compress new gloves as much as possible and drive out the air inside
5. Install the new gloves on the mouth of the glove and put it on the old glove
6. Outside the novice gloves, install the O -type circle on the slot inside the gloves
7. If you can, clean the new gloves into the isolated work gas environment (so that the air can be removed to the greatest extent, and the amount of air entering the glove box body)
8. From the glove box, pick the old gloves in the box with another glove
9. Outside the new gloves, install the O -type circle on the groove outside the gloves
10. Take out the old gloves through the transition cabin and deal with it properly.