Vacuum glove boxes are mainly composed of two parts: main box and transition room. If users have other special requirements, they can also be designed and manufactured as needed. There are two (or two or more) glove operation interfaces on the main box of the vacuum glove box, which is distributed in front of the box (or front and back). The use efficiency of the box. In addition, there are observation windows in front of the box (or front and back). The operator can clearly observe the operation process in the box, so that the operation process is intuitively displayed in front of the operator. The valve of the transition room is pumping and inflatable, which can be accessed when it needs to be pumped or inflated. There are valves and mouths installed on the main box, which can be used when it needs to maintain the air pressure balance or air -relies on the main box (the three -way valve between the gloves can also be used to deflate it). The front observation window of the vacuum glove box main box is installed on the top of the light. The transition room is a transition space for the main box and the stupid outside. It is composed of two sealing doors and two valves and a room. The two doors in the inside and outside can effectively separate the connection between the main box and the outside world, so that the inside and outside of the stupid body can enter and exit in the case of the main box and the atmosphere, thereby avoiding the trouble of repeated vacuum and inflatable of the main box.
