1. Before using the electric roll pairing machine, first remove the sundries between the rolls and keep the roll surface clean.
2. Adjust the left and right rolling thickness adjustment handles to make the thickness of the two rolls close to the required size.
3. At the same time, confirm whether the device has been connected to a 380v three-phase power supply, and ensure reliable grounding.
4. Equipment operators must bring designated labor protection supplies to ensure that there is no water on their hands.
The operation steps of the electric roller machine:
1. Turn the "power control" switch up to turn on the power of the device, and turn the "forward and reverse control" switch to the forward position. After confirming that it is correct, press the start button to make the roller machine rotate to drive the front and rear rollers to roll relative to each other. At the same time, observe whether the rolling direction of the rollers is correct. Otherwise, press the stop button to shut down the equipment, and then start it after confirming that it is normal.
2. When the roll is pressing the tablet, do not put your hands near the roll to prevent hand pressing. When there is foreign matter between the rolls and it is inconvenient to take it out, it must be squeezed out with a stainless steel sheet, and it is absolutely forbidden to remove it by hand. When abnormal noise is found, stop the machine immediately for inspection.
3. The roll has not been treated with anti-corrosion chrome plating, and the surface of the roll must be kept clean during tablet pressing.
The operation essentials of the electric roller machine:
1. When stopping the device, you must first press the stop button to turn off the device, and then turn down the "power control" switch. It is strictly forbidden to directly pull down the "power control" switch.
2. After each use of the rolling mill, the roll must be wiped clean with ionized water, then wiped with alcohol and dried with a dry towel. When wiping the roll machine, it must be wiped on the reverse rotating side of the roll to prevent towels and hands from being pressed in.
3. The butter cup ensures sufficient butter, and it is best to add butter once a month.
