Battery Cell Hot Press and Short Circuit Test Machine For Lithium Battery Cells After stacking/Winding Process

MR-DRY-200 Heat Press Machine is mainly used for battery cells hot pressing and Short Circuit Test after stacking/winding process, easy for battery cells into the pouch or shell.

Operation process:

product-650-178

Equipment Performance

1. It is driven by a pneumatic-hydraulic booster cylinder and has a precision guide structure design. It has accurate guidance, stable performance, compact structure and high efficiency.

2. The pressure of the upper template on the battery cell is adjustable within the range of the weight of the movable part of the upper template~600 kg.

3. The temperature of the lower template is controlled by a temperature controller, which is adjustable, stable, with an accuracy of ±2.5°C.

4. The holding time can be set according to the product's process, with an adjustable range of 0-999 seconds.

5. This machine has perfect safety protection performance, with dual-button operation protection, and is equipped with safety light curtain protection.

6. Easy to operate and maintain.

Basic Parameter

1	Configure power supply	AC110V-220V/50/60Hz Power: 3.5KW
2	Compressed air	≥0.6MPa
3	Overall dimensions	L600W500H1850mm
4	Equipment weight	300kg

Technical Parameter

1	Pouch cell size	L (10-200)W (5-150)H (2-50)
2	Working pressure	Maximum 10T (adjustable)
3	Working temperature	Room temperature~200°C (adjustable, compensable) accuracy ±2.5°C
4	Parallelism of upper and lower templates	±0.02mm
5	Template valid specifications	L200mm*W000mm
6	Pressure holding time	0~999 second (adjustable)
7	Head pressure	0~0.6Mpa (adjustable)
8	Battery cell flat pressure	0~0.6Mpa (adjustable)
9	Yields	Depends on the cell size and process.